Rolling Mill Bearings: Counter Rollers for Metal Flattening Machines -- Two Row Cylindrical Roller Bearings NNUP85205-2Z

Rolling Mill Bearings
WD four-row cylindrical roller bearingsare used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Their friction is low compared with other roller bearings. As they are normally mounted with an interference fit on the roll neck, they are particularly suitable for rolling mill applications where the rolling speed is high.
The low bearing cross section allows for relatively large roll neck diameters in comparison with the roll diameter. Since very many rollers can be incorporated, the radial load carrying capacity is exceptionally high.
WD four-row cylindrical roller bearings are only able to accommodate radial loads. They are therefore mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings, either radial or thrust designs, which take up the axial loads.
Check more at Rolling Mill Bearings

Bearing Code	NNUP85205-2Z
	NNUP85205-2RS
dmm	85
Dmm	205
Amm	112
Bmm	110
C KN	595
Co KN	1000
Italy A	2.0646
Italy B

Product Tags:

roller ball bearings

      

ball mill bearing

      

Rolling Mill Bearings: Counter Rollers for Metal Flattening Machines -- Two Row Cylindrical Roller Bearings NNUP85205-2Z Images